Phase I EVR Adapters & Caps

A0030 Fill Adapter

Click here to view this product in our catalog

The Emco Wheaton A0030 Adapter is designed for use with conventional dual point fill systems. Features recessed threads for easy installation and positive seating on riser pipes. Use with the A0097 Fill Cap

Material
Body: See table below
Gasket: Buna-N

  • CARB E.O. G-70-97-A
    ULC Listed MH27242

A0030-124S Fill Swivel Adapter

Click here to view this product in our catalog

The Emco Wheaton A0030-124S Swivel Adapter prevents accidental loosening of the adapter from the fill pipe. The adapter incorporates two set screws that are tightened after torquing the adapter. These screws prevent the adapter from becoming loose. Use with the A0097 Fill Cap. The A0030-124S is field serviceable with o-ring kit p/n 494301 and gasket kit p/n 409628. Use the Emco Wheaton A0081 Adapter Wrench for installation.

Material
Body: Brass
O-rings: Viton®
Gasket: Buna-N
Viton® is a registered
trademark of DuPont
Dow Elastomers.

  • Approved under Phase I EVR
    Executive Order VR-105
    Complies with EPA 40 CFR Part 63

A0076-124S Vapor Swivel Adapter

Click here to view this product in our catalog

The Emco Wheaton A0076-124S Vapor Swivel Adapter prevents accidental loosening of the adapter from the vapor pipe. The adapter incorporates two set screws that are tightened after torquing the adapter. These screws prevent the adapter from becoming loose. The A0076-124S is field serviceable with o-ring kit p/n 494301. Use with the A0099-002 Vapor Cap. Use the Emco
Wheaton A0081 Adapter Wrench for installation.

Material
Body: Brass
O-rings: Viton®
Gasket: Buna-N
Viton® is a registered
trademark of DuPont
Dow Elastomers.

A0097 Fill Cap

Click here to view this product in our catalog

The Emco Wheaton A0097-005 series Top Seal Fill Cap is designed for use on conventional A0030 or coaxial A0089 and A0096 Adapters. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage; made of corrosion resistant aluminum.

Material
Body: Aluminum
Cams: Brass
Links: Steel
Seal: Buna-N

A0097-010 Tank Gauge Cap

Click here to view this product in our catalog

The A0097-010 Tank Gauge Cap has the same features of the A0097-005 Fill Cap and is designed with a grommet to allow a cable to pass through the cap. The A0097-010 comes with two sizes of leak tight connector nut fittings: .125”-.375” and .190”-.250”.

Material
Body: Aluminum
Cams: Brass
Links: Steel
Seal: Buna-N

  • Approved under Phase I EVR
    Executive Order VR-105

 

A0099 Vapor Adapter Cap

Click here to view this product in our catalog

The Emco Wheaton A0099-002/003 Vapor Adapter Cap features a cam system designed for Stage I vapor recovery dual point systems. The cap is lockable and features a self-aligning,
toggle-action design with center collar to prevent breakage. The A0099 is made of corrosion resistant aluminum, powdered coated orange for vapor line identification.

Material
Body: Aluminum
Cams: Brass
Links: Steel
Seal: Buna-N

  • CARB E.O. G-70-97-A
    Approved under Phase I EVR
    Executive Order VR-105
    Complies with EPA 40 CFR Part 63