A0063EVR Vapor Shear Valve

A0063EVR Vapor Shear Valve

Click here to view this product in our catalog

The Emco Wheaton A0063EVR Vapor Shear Valve installs on vapor recovery lines under the dispenser to eliminate the escape of vapors in the event of a collision to the dispenser. The double poppet valve incorporates a 1.5” female NPT connection to the underground piping and a 1” female NPT connection to dispenser piping. The valve incorporates a 3/8” test port. The A0063EVR is approved for use with all CARB certified pre-EVR and EVR Phase II vapor recovery systems. Includes 5 anchoring bolts, washers and nuts. Does not include plate or U-bolts. If required, order the A0065-001 Mounting Kit.

Material
Body: Cast Iron
Spring: Stainless Steel
Seal: Viton®
Viton® is a registered
trademark of DuPont Dow
Elastomers.

A0060 Underpump Emergency Valve

View In Catalog

View Product Cutsheet

 

The Emco Wheaton A0060 Emergency Shear Valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The valve can be manually operated to facilitate dispenser maintenance and incorporates a 3/8” test port. The closing poppet assembly is positioned out of the fuel flow path to minimize pressure drop. The A0060 utilizes a standard three boss mounting arrangement. Available in single or double poppet variants.

Available with Stainless Steel Body and Top for
E85, DEF, ULSD, & Biodiesel Blends up to B100

Material
Body: Cast Iron or Stainless Steel
Spring: Stainless Steel
Seal: Viton®
Viton® is a registered trademark of
DuPont Dow Elastomers.

A0060 2" Stainless Steel Emergency Valve

View In Catalog

View Product Cutsheet

The Emco Wheaton A0060 2” emergency shear valve incorporates a stainless steel design, compatible with all gasoline/alcohol blends up to E15, Ultra Low Sulfur Diesel and biodiesel blends up to B100. It is designed for installation under gasoline or diesel dispensing units. The valve incorporates a replaceable shear section and a heat sensitive fusible link assembly. The A0060 can be manually operated to facilitate dispenser maintenance and incorporates a 3/8” test port. The closing poppet assembly is positioned out of the fuel flow path to minimize pressure drop. The valve utilizes a standard three boss mounting arrangement; mounting bolts included. Single and double poppet variants available.

Material
Body: Stainless Steel
Spring: Stainless Steel
Seal: Nitrile

 

 

A-0065 Mounting Kit

Click here to view this product in our catalog

The Emco Wheaton A0065-001 Mounting Kit is used to mount the A0060 and A0063 to the dispenser pan stabilizer bar. The kit includes 2 U-bolts, 4 lock washers, 4 hex nuts, 3 socket head counter-sunk screws and mounting plate. Weighs 3.8 lbs. To order the A0065 Mounting Kit with the A0060 Shear Valve, replace the first digit of the variant number with a 1. Example: A0060-102, single poppet male with mounting kit.

495645 Mounting Kit

Click here to view this product in our catalog

 

The Emco Wheaton 495645 Mounting Kit is used to mount the A0060 directly to the UnistrutTM. The kit includes 1 mounting bracket, 3 flat head cap screws,
2 bolts and 2 UnistrutTM channel nuts. Weighs 1.3 lbs.

  • UnistrutTM is a trademark of Unistrut Corporation