Extractor Fittings - A0079 Cross Style Float Valve Extractor
The Emco Wheaton A0079 Extractor Assembly consists of a cast iron extractor body and an internal “bar style” cage. This cage holds any length of A0075 Ball Float (sold separately). The A0079 may be ordered with a variety of port combinations to accommodate tank venting and Stage II vapor recovery piping. The A0079 is also available without an extractor cage for applications that do not require the use of a ball float and is an economical alternative for direct manifold systems.
Material
Extractor Body: Cast Iron
Approvals
ULC MH27242
The A0079 may be installed as part of the Emco Phase I EVR System without violating the Executive Order EV-105
A0079-new cross
A0079-019
Section View
The requested content cannot be found
Filter Options
A0079 Cross Float Valve Extractor
| Model No. | Comes With Cage? | Top/Bottom Thread | Outlet Thread A | Outlet Thread B | Cage Size | Lbs. |
|---|---|---|---|---|---|---|
| A0079-019 | Yes | 4” NPT | 3” NPT | 2” NPT | 2” | 11.9 |
| A0079-020 | Yes | 4” NPT | 2” NPT | 2” NPT | 2” | 10.7 |
| A0079-025 | Yes | 4” NPT | 3” NPT | 3” NPT | 2” | 12.0 |
| A0079-050 | No | 4” NPT | 2” NPT | 2” NPT | N/A | 8.5 |
| A0079-051* | No | 4” NPT | 3” NPT | 2” NPT | N/A | 10.8 |
| A0079-051SS | No | 4” NPT | 3” NPT | 2” NPT | N/A | 12.1 |
| A0079-052 | No | 4” NPT | 3” NPT | 3” NPT | N/A | 11.8 |
| Model No. | Comes With Cage? | Top/Bottom Thread | Outlet Thread A | Outlet Thread B |
*Most Common Variant